High-Flying HF-LPT100 User Manual Download

Page: 15 / 78

High-Flying

HF-LPT100 Low Power WiFi Module User Manual

Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)

- 9 -

PRODUCT OVERVIEW

1.1.

General Description

The HF-LPT100 is a fully self-contained small form-factor, single stream, 802.11b/g/n Wi-Fi module,

which provide a wireless interface to any equipment with a Serial/PWM interface for data transfer.HF-

LPT100 integrate MAC, baseband processor, RF transceiver with power amplifier in hardware and all

Wi-Fi protocol and configuration functionality and networking stack, in embedded firmware to make a

fully self-contained 802.11b/g/n Wi-Fi solution for a variety of applications.

The HF-LPT100 employs the world's lowest power consumption embedded architecture. It has been

optimized for all kinds of client applications in the home automation, smart grid, handheld device,

personal medical application and industrial control that have lower data rates, and transmit or receive

data on an infrequent basis.

The HF-LPT100 integrates all Wi-Fi functionality into a low-profile, 23.1x32.8x 2.7mm SMT module

package that can be easily mounted on main PCB with application specific circuits. Also, module

provides built-in antenna, external antenna option.

1.1.1

Device Features



Single stream Wi-Fi @ 2.4 GHz with support for WEP security mode as well as WPA/WPA2



Based on Self-developed High Cost Performance MCU



Ultra-low-power operation with all kinds of power-save modes.



Includes all the protocol and configuration functions for Wi-Fi connectivity.



Support STA/AP/AP+STA Mode



Support Smart Link Function



Support Wireless and Remote Firmware Upgrade Function



Support External I-PEXor Pad Interface antenna connector options.



Support Dial Switch to Control Power

(Reserved)



Support Max 3 Channel PWM Output



Compact surface mount module 22mm x 13.5mm x 6mm



Full IPv4 stack.



Low power RTOS and drivers.



FCC Certified.



RoHS and CE compliant.



Single supply

– 3.3V operation.

Summary of Contents for HF-LPT100















































































Search results

Summary of Contents for HF-LPT100

Reviews:

Related manuals for HF-LPT100

Brands by name

Popular brands

High-Flying HF-LPT100, User Manual

Search results

Summary of Contents for HF-LPT100

Reviews:

Related manuals for HF-LPT100

Brands by name

Popular brands