CHAPTER 4
Fixture Programming
34
trackspot
®
Bolt User Manual
Rotating Gobo Rotate Function
The
Rotating Gobo Function
parameter setting determines how the individual aperture
wheels on the Rotating Gobo Wheel move.
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See
MSpeed
(Motor Speed)
on page 35.
Rotating Gobo Rotate Coarse/Rotating Gobo Rotate Fine
When the
Rotating Gobo Function
channel is set to Indexed or Blink, these two channels
allows for 16-bit adjustment to the Rotating Gobo Wheel aperture position.
When a rotate option is selected in the
Rotating Gobo Function
parameter, the
Rotating
Gobo Rotate Coarse
parameter sets the selected aperture’s rotation speed from the slowest at
a DMX value = 0 to the fastest at a DMX value = 255.
Focus
This parameter gives you control of the focus range.When the controller DMX value = 0, the
focus is fully out. Increasing the value gradually moves the focus in to the maximum at a DMX
value = 255.
Iris
This parameter controls the movement of the Iris. When the controller DMX value = 0, the iris is
closed. Increasing the value gradually opens the iris until it is fully open at a DMX value = 255.
Shutter
The
Shutter
channel lets you select periodic strobing from slow to fast.
Gobo Rotate Function
Description
Indexed
Rotates the specified indexed aperture to any position
Forward Rotate
Forward aperture rotation from slowest to fastest
Reverse Rotate
Reverse aperture rotation from slowest to fastest
Blink
Closes and opens the shutter on rotate position changes
Forward Animate Rotate Forward aperture rotation in strobing steps
Reverse Animate Rotate Reverse aperture rotation in strobing step
