CHAPTER 3
The Menu System
20
trackspot
®
Bolt User Manual
Inverting Tilt (T/IN)
This menu item inverts the direction of the tilt motor, to allow fixtures mounted opposite each
other vertically to respond to tilt movement commands in the same direction.
To invert the fixture’s tilt motion:
1. Press and hold <Menu> until
AddR
appears on the LED display.
2. Scroll to the
SET
menu. Press <Enter> to select.
3. Scroll to the
T/IN
menu. Press <Enter> to select.
4. Scroll to
ON
to invert the fixture’s tilt motion, or
OFF
to return the fixture’s tilt motion to
normal orientation.
5. Press <Enter> to store.
Swapping Pan and Tilt (SWAP)
This menu option swaps the pan motor and tilt motor operation to allow fixtures hung
perpendicular to each other to respond to pan and tilt movement commands in the same
direction.
To swap pan and tilt motion:
1. Press and hold <Menu> until
AddR
appears on the LED display.
2. Scroll to the
SET
menu. Press <Enter> to select.
3. Scroll to the
SWAP
menu. Press <Enter> to select.
4. Scroll to
ON
to swap the fixture’s pan and tilt motion, or
OFF
to return the fixture’s pan and
tilt motion to normal orientation.
5. Press <Enter> to store.
Data Loss (DLOS)
Use this menu item to determine how the fixture will react in the event of DMX data loss by
turning off the LED light engine upon Data Loss or keeping the LED light engine on until shut
down.
To select a data loss option:
1. Press and hold <Menu> until
AddR
appears on the LED display.
2. Scroll to the
SET
menu. Press <Enter> to select.
3. Scroll to the
dLOS
menu. Press <Enter> to select.
4. Scroll to
LONG
to turn the LED light engine off only when the fixture is shut down, or
SHRT
to turn off the LED light engine one second after data loss.
Press <Enter> to store.
