High End Systems SolaFrame Theatre User Manual Download Page 48

Page: 48 / 48

SolaFrame Theatre v1.2.5

User Manual

Gobo Wheel 1 Er

(Gobo Wheel 1- error) This message will appear after the reset of the fixture if the magnetic-indexing

circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving

IC on the main PCB). The Gobo Wheel 1 is not located in the default position after the reset.

Gobo Rot. 1 Er

(Gobo Rot. 1- error) This message will appear after the reset of the fixture if the magnetic-indexing

circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving

IC on the main PCB). The Gobo Rot. 1 is not located in the default position after the reset.

Gobo Wheel 2 Er

(Gobo Wheel 2- error) This message will appear after the reset of the fixture if the magnetic-indexing

circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving

IC on the main PCB). The Gobo Wheel 2 is not located in the default position after the reset.

Focus Er

(Focus - error) This message will appear after the reset of the fixture if the magnetic-indexing circuit

malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving IC on

the main PCB). The Focus is not located in the default position after the reset.

Zoom Er

(Zoom - error) This message will appear after the reset of the fixture if the magnetic-indexing circuit

malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving IC on

the main PCB). The Zoom is not located in the default position after the reset.

Animation Er

(Animation - error) This message will appear after the reset of the fixture if the magnetic-indexing

circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving

IC on the main PCB). The Animation is not located in the default position after the reset.

Blade Rot Er

(Blade Rot - error) This message will appear after the reset of the fixture if the magnetic-indexing

circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or

it’s driving

IC on the main PCB). The Blade Rot is not located in the default position after the reset.

Summary of Contents for SolaFrame Theatre

















































Search results

Summary of Contents for SolaFrame Theatre

Reviews:

Related manuals for SolaFrame Theatre

Brands by name

Popular brands

High End Systems SolaFrame Theatre, User Manual

Search results

Summary of Contents for SolaFrame Theatre

Reviews:

Related manuals for SolaFrame Theatre

Brands by name

Popular brands