High End Systems SolaFrame Theatre User Manual Download Page 34

Page: 34 / 48

SolaFrame Theatre v1.2.5

User Manual

SET

Status

No DMX Status

With this function, when the drive is not DMX signal, it runs automatism, close, hold and music, the

default is hold.

1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button unt

il ”SET” is

displayed. Press ENTER, the di

splay will show “SET”. Tap the <Up/Down>button until the display

will show “Status”. Press ENTER, the display will show “Status”.

2. Press <Up/Down>

the display will show “No DMX Status”.

3. Press<ENTER> the display will

show ”No DMX Status”.

4. T

he display show “Hold”, Press <Up/Down> the display will show “Close”, “Auto”,.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Pan Reverse

With this function you can reverse the Pan-movement.

1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button

until ”SET” is

displayed. Press ENTER, the di

splay will show “SET”. Tap the <Up/Down>button until the display

will show “Status”. Press ENTER, the display will show “Status”.

2. Press <Up/Down> the display

will show “Pan Reverse”.

3. Press<ENTER>

the display will show ”Pan Reverse”.

4. Th

e display show “OFF”, Press <Up/Down>;the display will show “ON”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Tilt Reverse

With this function you can reverse the Tilt-movement.

1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button

until ”SET” is

displayed. Press ENTER, the di

splay will show “SET”. Tap the <Up/Down>button until the display

will show “Status”. Press ENTER, the display will show “Status”.

2. Press <Up/Down>

the display will show ”Tilt Reverse”.

3. Press<ENTER>

the display will show ”Tilt Reverse”.

The display show “OFF”, Press <Up/Down> the display will show “ON”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Encoders

With this function, you can feedback switch of pan movement or tilt movement.

1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button

until ”SET” is

displayed. Press ENTER, the dis

play will show “SET”. Tap the <Up/Down>button until the display

will show “Status”. Press ENTER, the display will show “Status”.

2. Press <Up/Down>

the display will show ” Encoders.”.

3. Press<ENTER>

the display will show ” Encoders.”.

Summary of Contents for SolaFrame Theatre

















































Search results

Summary of Contents for SolaFrame Theatre

Reviews:

Related manuals for SolaFrame Theatre

Brands by name

Popular brands

High End Systems SolaFrame Theatre, User Manual

Search results

Summary of Contents for SolaFrame Theatre

Reviews:

Related manuals for SolaFrame Theatre

Brands by name

Popular brands