High End Systems SolaFrame Theatre User Manual Download

Page: 35 / 48

SolaFrame Theatre v1.2.5

User Manual

The display show “ON”, Press <Up/Down> the display will show “OFF”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Pan/Tilt Speed

With this function, you can change the speed of the Pan Tilt Motion.

1. Tap <MODE/ESC>button, access the main menu

Tap the <Up/Down>button until ”SET” is

displayed. Press ENTE

R, the display will show “SET”. Tap the <Up/Down>button until the display

will show “Status”. Press ENTER, the display will show “Status”.

Press <Up/Down> the display will show ”Pan/Tilt Spd.”.

Press<ENTER> the display will show ”Pan/Tilt Spd.”.

4. The displ

ay show will show “Speed 1 “, … “Speed 4

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Hibernation

—Standby mode

The lamp and step motors will be power off if the fixture stay without DMX signal for 15 mins

(Factory default).And the fixture will be reset before working once it receive DMX signal again.

1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button

until ”SET” is

displayed. Press ENTER, the di

splay will show “SET”. Tap the <Up/Down>button until the display

ll show “Status”. Press ENTER, the display will show “Status”.

2. Press <Up/Down>

the display will show ”Hibernation”.

3. Press<ENTER>

the display will show ”Hibernation”.

The display show “15M”,Press <Up/Down> the display will show “01M”,”02M”. “99M” or ”OFF”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Lens Heater

With this function, you can display the Lens Heater settings

1. Tap <MODE/ESC>button, access the main menu

Tap the <Up/Down>button until ”SET” is

displayed. Press ENTER, th

e display will show “SET”. Tap the <Up/Down>button until the display

will show “Status”. Press ENTER, the display will show “Status”.

Press <Up/Down> the display will show ”Defogger”.

Press<ENTER> the display will show ”Defogger”.

The display show “Defog OnOp”, Press <Up/Down> the display will show “Defog OFF”, ”Defog
Onprw”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Summary of Contents for SolaFrame Theatre

















































Search results

Summary of Contents for SolaFrame Theatre

Reviews:

Related manuals for SolaFrame Theatre

Brands by name

Popular brands

High End Systems SolaFrame Theatre, User Manual

Search results

Summary of Contents for SolaFrame Theatre

Reviews:

Related manuals for SolaFrame Theatre

Brands by name

Popular brands