High End Systems SolaFrame 2000, User Manual

Page: 33 / 33

33
Error codes
When you turn on the fixture, it will make a reset at first. The display may show the “Err channel is XX” message while there are
problems with one or more channels. “XX” stands for channel 1, 2, 3, 4, 5, 6 who has the testing sensor for positioning. For
example, when the display shows “Err channel is Pan movement”, it means there is some error in channel 1. If there are some
errors on channel 1, channel 3, channel 11 at the same time, you may see the error message, “Err channel is Pan movement”, “Err
channel is Tilt movement” , “Err channel is Shutter”, flash repeated for 2 times, and then the fixture will generate a second reset. If
the fixture error message remains after performing reset more than 2 times, only the channels which have errors cannot work
properly, others can work as usual. Please contact with dealer or manufacturer for service, self-repair is not allowed.
PAN- movement Er
(PAN-yoke movement error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main PCB). The PAN-
movement is not located in the default position after the reset.
TILT- movement Er
(TILT-head movement error) This message will appear after the reset of the fixture if the head’s magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main PCB). The TILT-
movement is not located in the default position after the reset.