High End Systems SolaFrame 2000, User Manual

Page: 23 / 33

23
Software Version
With this function, you can display the software version of the device.
1. Tap <MODE/ESC>button
,
a
c
cess the main menu Tap the <Up/Down>button until ” Info” is
displayed. Press ENTER, the display will show “Info”.
2.
Press <Up/Down> the display will show “Software Ver”.
3. Press<ENTER> the display will show ”Software Ver”.
4. The display show “Ver x.x.x”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
SET
Status
No DMX Status
With this function, when the drive is not DMX signal, it runs automatism, close, hold and music, the default is
hold.
1. Tap <MODE/ESC>button
,
a
c
cess the main menu Tap the <Up/Down>button until ”SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display will
show “Status”. Press ENTER, the display will show “Status”.
2.
Press <Up/Down> the display will show “No DMX Status”.
3. Press<ENTER> the display will show ”No DMX Status”.
4. The display show “Hold”, Press <Up/Down> the display will show “Close”, “Auto”,.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Pan Reverse
With this function you can reverse the Pan-movement.
1. Tap <MODE/ESC>button
,
a
c
cess the main menu Tap the <Up/Down>button until ”SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display will
show “Status”. Press ENTER, the display will show “Status”.
2.
Press <Up/Down> the display will show “Pan Reverse”.
3. Press<ENTER> the display will show ”Pan Reverse”.
4. The display show “OFF”, Press <Up/Down>;the display will show “ON”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tilt Reverse
With this function you can reverse the Tilt-movement.
1. Tap <MODE/ESC>button
,
access the main menu Tap the <Up/Down>button until ”SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display will
show “Status”. Press ENTER, the display will show “Status”.
2.
Press <Up/Down> the display will show ”Tilt Reverse”.
3. Press<ENTER>the display will show ”Tilt Reverse”.
4. The display show “OFF”, Press <Up/Down> the display will show “ON”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Encoders
With this function, you can feedback switch of pan movement or tilt movement.
1. Tap <MODE/ESC>button
,
a
c
cess the main menu Tap the <Up/Down>button until ”SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display will
show “Status”. Press ENTER, the display will show “Status”.
2.
Press <Up/Down> the display will show ” Encoders.”.
3. Press<ENTER> the display will show ” Encoders.”.
4. The display show “ON”, Press <Up/Down> the display will show “OFF”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Hibernation ——Standby mode
The lamp and step motors will be power off if the fixture stay without DMX signal for 15 mins (Factory
default).And the fixture will be reset before working once it receive DMX signal again.
1. Tap <MODE/ESC>button
,
a
c
cess the main menu Tap the <Up/Down>button until ”SET” is
displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display will
show “Status”. Press ENTER, the display will show “Status”.
2.
Press <Up/Down> the display will show ”Hibernation”.
3. Press<ENTER> the display will show ”Hibernation”.
4. The display show “15M”,Press <Up/Down> the display will show “01M”
,
”02M”. “99M” or
”OFF”.
5.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Service PIN
Password ——The Password for this function is “50”.
RDM PID —— With this function you can call up various submenus via RDM.