High End Systems CATALYST DV, User Manual

Page: 19 / 224

Catalyst® V3 Media Server User Manual
3
Chapter 2:
QuickStart
This Chapter describes the steps to quickly setup and begin using a Catalyst Media Server
system. These instructions also ship with your product as a Startup Sheet for the model
you purchased. If you purchased a Software Only version of the product, setup
instructions shipped with your product. For information on configuring hardware to run
Catalyst Media Servers software, visit the High End System website support section
[http://www.highend.com/support/digital_lighting/catalystsupportguide/].
Media Server Setup
Unpacking the Roadcase
Unlatch and remove the top lid from the roadcase.Verify that the following contents are
stored in the lid and remove any you need for your application:
• LCD monitor
• Keyboard
• Mouse
• IEC TO 110v Adapter to attach an additional
monitor or device like a firewire drive to the power
conditioner in the server rack
• IEC 220v power cord optional for 220v applications
• USB Serial Adapters: One RS232 for serial devices
and One RS422 for Deck Control
• A Mac G5 power cord and phone cable (only needed if
you upgrade your G5 computer in the future)
• Documentation for the G5, Power Conditioner, VDA, USB PCI CD, and a Catalyst
Software CD-ROM
Inspecting Your Catalyst Media Server
As you unpack the Media Server rack, verify that it is undamaged. If the product is
damaged or parts are missing, notify both the shipping company and your sales agent
immediately.
Before returning merchandise, contact your High End Systems dealer/distributor for a
Return Material Authorization (RMA) number. The factory cannot accept goods shipped
without an RMA number. Return a damaged product for repair in its original roadcase. High
End Systems assumes no responsibility for products damaged during transport.
Top Lid
Base
Server Rack