4. Trouble Shooting Guide
SYMPTOMS
4. Rinse valve hasn't been shut off
4. Check if the rinse valve of
generator is closed. Close the circuit
protector and call our maintenance
service center of the above four steps
failed.
Steam not stop after
turn off the controller
1. The controller fails to function
1. Switch off circuit protector.
2. The steam generator fails to function.
2. Call our maintenance service
center.
Water leak out from
the steam head
The steam generator fails to function.
1. Switch off circuit protector.
2. Shut off water supply valve.
3. Call our maintenance service
center.
There are user serviceable parts in the generator. All repairs should be performed by a
qualified service person. The Trouble Shooting Guide below is for general reference
only.
PROBABLE CAUSES
ACTION TO BE TAKEN
No steam while
controller has been
turned ON.
1. Steam generator hasn't been
connected with the water supply
1. At least wait 10 minutes after the
opened the controller.
2. The controller fails to function
2. Check if the circle protector is on
the "ON" position.
3. The steam generator fails to function.
3. Check if the power is on and the
water supply valve is open.
