1. Startup Procedure
USAGE
A. Make sure that the pump is on and that there is at least 76 LPM(20 GPM) flow through
the pool heater. The heating elements will fail prematurely if allowed to operate with
insufficient water flow.
B. Check temperature control setting, also, examine wiring for loose connections, etc.
C. Turn on power at main disconnect switch.
D. Turn on the water heater by pressing ON/OFF button on the heater.
WARNING:
The thermal protector will shut off the heater when the system water overheates.
If that occures should disconnect the power at the breaker switch and determine the cause
before resetting.
3. Control Panel: Heaters with manual thermostat
2. INDICATOR LIGHTS
The control has two indicator lights of HEAT and POWER.
POWER: Light on means heater has power to control circuit.
HEAT: Light on means Heating elements are powered.
Switch the thermostat knob to set the desired temperature. If
the heater is calling for heat the HEAT light will be illuminated.
For heaters equipped with a digital thermostat. The digital thermostat control which
measures the temperature of the water as it enters the heater has a MENU button, up
and down adjustment buttons, and an LED display.
The desired water temperature (set point) is controllable between 40
°
F and 100
°
F
(5
℃
and 40
℃
). The set point may different from the actual water temperature at the
pool or spa due to heat loss in the piping.
4. Control Panel: Heaters with Digital Thermostat Control
Brief on Controlling Procedure
1.Temperature setting: Press "Set" gently to
display controlling temperature. Press
▲
or
▼
to
indicate your desired temperature, that will be
saved after 6sec. The water heater will
automatically control the temperature of pool water.
2. Data setting: Press "set" for 6 seconds for
setting . On entering setting, HC will be displayed.
Then Press
▼
or
▲
to set
HC-L5-H5-PE-CR-d.
In the measured temperature mode, the water
temperature in the heater is displayed. The
LED corresponding to the current temperature
scale will be illuminated. If the heater is calling
for heat the HEATING Light will be illuminated.
Summary of Contents for Hidro-H11
Page 1: ...SPA HEATER USER MANUAL ...
