USER'S GUIDE R14 AXIAL FAN , Code: 0000, Iss: 21.09.2021
09
MAINTENANCE, SERVICE AND CLEANING
Before any maintaining or repairing operation is carried out, the unit must be securely disconnected from any power supply source!
This unit should only be opened or maintained or repaired by a manufacturer or by a manufacturer-qualified and authorised personnel.
Ensure that the fan is switched off from the supply mains before removing the guard.
Do not attempt to open service port. Service port is intended for factory firmware download only. Improper disassembly of the port cover my result in
reduced sealing properties and penetration of moisture into electronic compartment. Tampering with any enclosure will void warranty coverage.
0
Cleaning
Regular inspection, if required, and cleaning when necessary to prevent imbalance due to the build-up of dirt. Clean the fan`s flow area.
Blades must be cleaned carefully to avoid damage to them.
Never use a high-pressure cleaner or water spray for cleaning.
Wet cleaning under voltage may lead to an electric shock.
Do not use any aggressive paint solvent cleaning agents.
For cleaning, use just a moist cloth. You can clean the entire fan with a moist cloth.
If water penetrates into the motor, the motor windings must dry before restarting.
Cleaning and user maintenance shall not be made by children without supervision.
10
TRANSPORT AND STORAGE
Unit must be transported only in its original package.
When the fan's transported with wood spacer on pallet, take care with the cables (in the situation that fan has connection cables). When unpacking fans,
transported in such a way, grip the fan to protection grill. Do not apply any force for the cable(s).
When transporting fans mounted on final units (apparatus), take care that they are properly secured and don`t touch other devices which are
transported near or on to.
Store the fans in the original packaging in a dry area protected from the weather. Do not store fans in extreme heat and cold.
We recommend a maximum of one year of storage. After a long period of storage we recommend that you inspect the bearings for proper operation
before installation.
Permissible transport / storage temperature range: -40°C .. +80°C.
Permissible transport / storage humidity: 5 - 95%.
11
ErP, ROHS AND EMC DIRECTIVES
Fan must be mounted in appropriate way to achieve optimal efficiency and life expectancy. We suggest assembling fan in long inlet cone, with fan blade
trailing edge aligned with outlet edge of inlet cone.
Only environment friendly, recyclable materials according to RoHS2 (2011/65/EU) and REACH (EC1907/2006) directive are used in the product.
Disposal must be carried out professionally and environmentally friendly in compliance with regulations applicable in your country.
Design of the product enables simple decomposition of all components. Main components are appropriate marked for easy further handling at product
end-of-life.
Complying with the EMC standards has to be established on the final appliance, as different mounting situations can result in changed EMC properties.
12
SERVICE ADDRESSES AND ADDITIONAL DATA
Please refer to the homepage at www.hidria.com for a list of our subsidiaries worldwide.
Hidria reserves the right to change any specifications or data without notice.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to
the system.
0
© Copyright HIDRIA d.o.o., All rights reserved. Document is subject to change without prior notification.
9 / 9