Easy HD Expressway!
BR-101E QIG
WWW.HIDES.COM.TW
1
Table of Contents
1.
Introduction
..........................................................................................................2
2.
Board Descriptions
...............................................................................................3
3.
Easy Repeater Setup
............................................................................................4
3.1.
Short Jumper J1
...........................................................................................4
3.2.
Connect RF-in/out cable
..............................................................................4
3.3.
Apply 5V DC Power to the USB connector
...............................................4
3.4.
Check LED State
..........................................................................................4
4.
Setup PC/NB environment for configuration
....................................................6
4.1.
Run Setup.exe to install configuration software on your PC/NB
............6
4.2.
Remove Jumper J1 for USB configuration mode
.....................................6
4.3.
Connect USB port to your PC/NB
..............................................................6
4.4.
Driver install
.................................................................................................6
5.
Tool Usage-Configure
..........................................................................................8
6.
Tool Usage- Firmware Update
..........................................................................12
7.
Tool Usage- Set Call Sign
...................................................................................15
8.
Tool Usage- Initialize EEPROM
.......................................................................18
9.
Filter Specifications
............................................................................................21
9.1.
BR-101E DTV Bridge Board U/V
Filter Design.......................................21