Easy HD Expressway!
BR-101E QIG
WWW.HIDES.COM.TW
10
1.
Read EEPROM
It retrieves current settings from board’s EEPROM.
2.
Demodulator and Modulator Settings
For DVB-T to DVB-T, please set as,
Demod Chip: IT9133BX
Modulation Type: DVB-T
3.
Receiver channel settings,
Specify the channel frequency and bandwidth for receiver.
The bandwidth supported depends on the jumper J2 of the receiver module.
The I2C address should be 0x3A for BR-101, and 0x38 for BR-100
Jumper J2 OFF: 2/3/4 MHz BW reception supported
Jumper J2 ON: 5/6/7/8 MHz BW reception supported
4.
Receiver PID filter settings
PID filter can be enabled to filter out unwanted PID’s.
Two operation modes for PID filter, BLOCK mode and PASS mode.
2
3
4
2
5
6
1
7