HID EdgePlus Quick Installation Manual Download Page 5

EdgeReader and EdgePlus Installation 

 

Part No. 82000-901 

 

Step 1

 

Connect 

1.1

 

Wiring the Edge Device 

Reference 

82000-902 Reference Card 

for wiring instructions. 

Step 2

 

Contact 

Contact the Edge device through two methods. 

 

Discovery Client (DHCP or Static TCP/IP Configurations Only) 

 Virtual 

Port 

2.1

 

Discovery Client 

The Discovery Client provides a technician with a method of locating all of the Edge devices that are 
connected to a network.  Edge device information is displayed providing the ability to ‘blink’ the Edge 
device Comm LED and configure it by launching a browser pointed at the Configuration GUI of the 
targeted Edge device.  When the Discovery Client is launched, a discover command is issued and the 
Configuration GUI screen is populated with the results.  Also provided is the ability to refresh the 
Configuration GUI screen on command. 

Use this feature when the Edge device(s) and the network have been installed and are operational, but 
before the Edge device(s) has been configured.  At this point, all of the Edge devices on a network will 
have the same host name and unknown IP addresses (assuming a DHCP environment).  In this 
scenario, the only mechanism available to configure a Edge device is by placing one device on the 
network at a time.  The Discovery Client provides an easy to use mechanism to configure Edge devices. 

2.1.1

 

Installation 

®

An operating system of Windows  XP with .NET Framework v2.0 installed is a requirement for the 
Discovery Client to function properly. 

1.  The Discovery Client can be downloaded by placing the following path in an Internet browser. 

http://www.hidcorp.com/downloads/DiscoveryClient.zip

  

2. The 

File Download

Open

 dialog will display, click 

setup.exe

3.  When the contents of the zip file display, double-click 

Run

4.  If a security warning is received, click 

Next 

5.  From the Discovery Client Welcome page, click 

Next 

6.  Select the Installation folder and who should have access to the Discovery Client, click 

Next

7.  Confirm the installation location, click 

8. Click 

Close 

April 2007 

 

Page 5 of 14 

© 2007 HID Global Corporation. All rights reserved. 

Summary of Contents for EdgePlus















Reviews: