EdgeReader and EdgePlus Installation
Part No. 82000-901
Firewall
If an Edge device is being installed where it communicates through a firewall, then the firewall should
be configured to allow TCP data transfer on the specified port(s).
Note
: Confirm with the Network/IT Admin what ports are to be allowed through the firewall. The
following describes the default ports.
1. Before starting, ensure that any pop-up blocker software is disabled on the computer
2. Open the following ports on the firewall
•
connection_port (4070)
•
listen_port (4050)
If you are
not
familiar with configuring a firewall for the network, contact the Network/IT administrator
or manager.
CAUTION:
If the firewall is not configured properly the Edge device cannot communicate with the host.
Contact Information
Americas
HID Global (California, USA)
support: [email protected]
sales: [email protected]
main: (949) 598-1600
sales: (800) 210-4744
telephone: 1-800-237-7769
fax number: (949) 598-1690
Europe, Middle East and Africa
HID Corporation, Ltd. (Haverhill, UK)
support: [email protected]
sales: [email protected]
telephone:
+44 1440 714 850
fax number: +44 1440 714 840
Asia-Pacific
HID Asia Pacific Ltd. (Hong Kong)
support: [email protected]
sales: [email protected]
telephone: (852) 3160 9802
fax number: (852) 3160 4809
April 2007
Page 11 of 14
© 2007 HID Global Corporation. All rights reserved.
