HID DTC1000M, User Manual, Page: 99 / 123

© 2012 HID Global Corporation All rights reserved
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
99
Additional Printer Specific Tools
Label Description
INFO

Printer Type

Firmware Version

IP Address

Flipper

Lamination

Magnetics

E-Card

Password

Card count
TEST
PRINTS Color Photo:
Select this to print a color card to test communication and integrity.
Alignment:
Select this to print a card used to align the print image on the card.
Settings:
Select this to print a card with the Advanced settings.
Resin:
Select this to print a RESIN test card.
Rewritable:
Select this to ERASE the Rewritable card.
Magnetic:
Select this to test Magnetic encoding. (Hi-Co only)
Lamination:
Select this to laminate a test card.
Hopper
Select Ability to select which hopper to feed cards from. Applies to Dual
Hopper Printers.
Toolbox
Clean Printer:
Select this to run the clean printer routine.
Clean Laminator:
Select this to run the clean laminator routine.
Calibrate Mag:
Select this to calibrate the Magnetic Sensor