HID DTC1000M, User Manual, Page: 48 / 123

© 2012 HID Global Corporation All rights reserved
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
48
Using the Advanced Settings tab
Setting Option
Print Top of Form Use this option to adjust the length-wise or horizontal
position of the printed image on the card (so it appears to
be centered).
Caution: If the negative value is set too
high, the Print Ribbon may break.
Print End of Form Use this option to reduce or increase the overall printable
area; this is done in order to optimize edge to edge
printing toward the trailing edge of the card.

Maximum adjustment range is +/- 127.

Each increment equals .01”.
Print Left of Form Use this option to adjust the vertical position of the printed
image on the card; so it appears centered.

Maximum Adjustment Range is +/- 127.

Each increment equals .01”.
Cleaning Rate
Use this option to adjust the number of cards printed
before the Printer displays a message indicating cleaning
is needed.

The default value is 3000 cards.