hib.co.uk
3
Pairing Device To the Mirror
• To activate the Bluetooth
TM
, wave hand under the
sensor switch located at the bottom of the mirror
(see figure B). The mirror will give out a tone to
confirm it is ready for pairing.
• Activate the Bluetooth
TM
on your device* (see figure
C). Refer to the devices instructions for details.
• Search for “HiB001” if prompted for a connection
code, use “0000”. The mirror will give out a tone to
confirm successful connection.
• You can now play music or other media through the
Bluetooth
TM
mirror (see fig. D).
• When the mirror is turned off the connection to the
Bluetooth
TM
will be lost. When the mirror is turned
on again it will automatically reconnect to the last
connected device.
• Refer to your device manual for operating controls.
• Music will stop playing when a phone call comes
into the Bluetooth
TM
device, and will automatically
reconnect when finished.
*Only compatible Smart Phones & Bluetooth
TM
Devices.
Lamp Replacement
In the unlikely event that the LED light strip should fail
please contact HiB customer services for a replacement
part at the address shown on the back page.
Care Instructions
To preserve the high quality finish of your HiB product,
please ensure you regard the following care and
cleaning recommendations:
Do not use abrasives or solvents when cleaning this
product.
Wipe off all water spillages as soon as possible using a
soft, damp cloth.
Trouble Shooting Guide
Symptoms
Possible
Problem
Solution
Device not
paired
Bluetooth
TM
not
activated
Check Bluetooth
TM
is
activated on compatible
device & mirror is turned on
Device not
connecting
Only one
device can be
connected to the
mirror at any one
time
Disconnect all devices and
reconnect only one device
No volume
Volume is
controlled from
device
Increase volume on device
No
connection
Out of range
Range is within 8 metres,
move device closer to
mirror
Turn Mirror
On Fig. B
Activate BluetoothTM Fig. C
Connect Fig. D
