• Take the delivery instructions from your HIAB Service workshop, or receive instruction from an
experienced person from your own company. Only then should you operate your loader.
• Ensure that you comply with the statutory requirements of the country in which you use the
loader (for example, certificate, obligatory safety-helmet).
DANGER
• Carry out yourself only the service and
maintenance work you have the requisite
knowledge and experience of.
• All other maintenance work may only be
carried out by a HIAB service workshop.
• Ensure that every defect is rectified
immediately, according to the instructions.
• Follow the instructions exactly!
• All other work to rectify faults must be
performed by personnel in a HIAB service
workshop!
WARNING
• Never clean the electronic system, plastic components, signs or bearings with a
high-pressure jet cleaner. It could cause damage.
• Never expose the electronic system to high electrical voltages. This could
damage the control system.
• Never immerse the controller in water or other liquid. This will make the
controller unusable.
If your loader is equipped with add-on lifting equipment (hoist, rotator, etc.):
• The operation of the loader with add-on lifting equipment can differ from the
operation as described in this manual.
• You should therefore study the Operating Manual for the add-on equipment
carefully, before you use the loader.
• Take particular note when placing the loader in to or out of transport position.
1.3. Identification of the utility loader
Description and identification of the utility loader:
Mark: ...................
Type: ...................
Serial number: ............................
Manufact. year: ............................
Type:
..................................
Serial number: .................................
Manufact. year: .....................
Mark:
.....................
Introduction
HIAB J14S J24S
9
