Hi-Target ZTS-320R Series Manual Download Page 84

Page: 84 / 154

9.1.5 Surveying

If have set the instrument to „survey first‟how to set→, after
pressing soft key F4 „EDM‟, the instrument then start

measurement of the coordinates. As soon as the measurement is

done successfully, the soft key „record‟appears. Press „Record‟
to enter page of „information‟. Edit the point name and code

and save.

If have set the instrument to „edit first‟how to set→, after

pressing soft key F4 „EDM‟, users may first enter the
„Information‟ page, then measurement. The operations are

similar.

Press soft key F2 „Offset‟ to enter offset menu. Select one

mode and start offset measurement.

Press soft key F3 „Save‟ to start distance measurement.

After a successful measurement, the coordinate will be saved

automatically.

T.H:

Pt.name

N: S m

Reco

Offset

Save

EDM

Summary of Contents for ZTS-320R Series



























































































































































Search results

Summary of Contents for ZTS-320R Series

Reviews:

Hi-Target ZTS-320R Series, Manual, Page: 84 / 154

Search results

Summary of Contents for ZTS-320R Series

Reviews: