62
to the previous point name. The code entered depends on your
requirements and the target height depends on facts. Press
„ENT‟ to save measurement. P.S. If having not selected file at
first when pressing „Save‟ under Angle Mode, a dialogue box
of „Select File‟ will be on the screen before „information‟. You
may now select file for saving.
When the measurement is out of the scope of compensator,
the instrument will display „Tilt over!‟ when pressing „Save‟
and the measurement cannot be saved.
If the measurement is saved successfully, the instrument
displays box of „Record:****** ‟ for 0.5 second and switch
back to the Coordinate Mode.
Meas:
Press soft key „F2‟ to start distance measuring device. The
instrument will calculate out the coordinate of the target point
and display. If the current distance measuring mode is continue
or tracking mode, then you may continually press „ESC‟ to quit
distance measurement, otherwise press ‟ANG‟ or „DIST‟ to
stop distance measurement and switch to Angle or Distance
Mode.
Mode: The same as the key „Mode‟ under Distance Mode
On the Second Page:
Setting:
Press soft key „F1‟ to enter Settings of „Height of Ins. &
Target‟