Hi-Target V90 Plus, Getting Started

Page: 28 / 128

25
V90 Plus GNSS RTK System Getting Started
3. Record point name, receiver S/N
，
receiver height
，
beginning time.
4. Press power button to power on and double click power button to set static collecting mode; then
single click power button to confirm it.
Notice:
The satellite lamp flashing means the receiver is searching the satellites. The satellites are fixed once
the satellite lamp stays lit on. Status lamp flashes due to your collection interval set, which means a
epoch will be collected every flashes.
5. Turn off the receiver after static data collected and record the turn off time.
6. Download and post-process static data.
Caution
：
Don’t move the tri-brach or change the collecting set while the receiver is collecting data.
V90 Plus default settings will not record Rinex format data .Users can change relative settings by
GNSS Receiver Manager software. Below is the GNSS Receiver Manager software interface.