HHP IMAGETEAM 5600, User Manual

Page: 56 / 144

6 - 2
RS-232 programmable selections are used by both the primary and secondary
interfaces. Changing an RS-232 parameter (e.g., baud rate or parity), while in
primary
or secondary mode will affect both interfaces. If you want to change the
RS-232 settings, refer to the Connecting the Scanner with RS-232 Serial Port
section on pages 2-6 to 2-9.
Secondary Non Decoded Output Laser Emulation
Use this selection when connecting to a secondary terminal with integral
decoding. This also sets the transmission rate to 36 scans per second and the
polarity to white high.
Non Decoded Output Laser Emulation Transmission
Rate
The Transmission Rate is limited by the terminal’s ability to receive data without
dropping characters.
Default = 36 scans/second.
Non Decoded Output Laser Emulation Polarity
The Polarity can be sent as standard with white bars high, or reversed with black
bars high.
Default = White High.
RS-232 Interface
Non Decoded Output
* 36
100
* White High
Black High