Installation of the product in a new location
1. Choose the location
Decide where to install the product.
Product location should have
good interior effect, flat side and
be easily drillable
(needed for hole(s) for bolts).
3. Attach with bolts
Attach product to ceiling with
four bolts.
4. Flat cable extension/connection:
Take off adhesive tape from flat cable
and fix it on the ceiling
[Purchased separately]
You can extend the length by connecting
1M
2M
3M
Extension flat cable
and gender
Adhesive Tape
5. Finish installation
Connect the enclosed adapter, and
turn on the power to finish installation.
After fixing flat cable extension/cellar
**Using the Flat cable for the cable exposed.
Extension flat cable types are sold separately
(Depending on the area, choose
an appropriate size and connect)
4 bolts are needed when
installing product in new
location, and, in this case,
installation is easy and
flat cable is utilized.
2. Appoint location of the hole
Drill final product hole(s) according
to product size.
Caution: pierce the hole according
to above picture if one’s ceiling is
constituted of strong materials.
If it is wood/plaster board, one
does not need to drill holes to install.
Summary of Contents for Vivart HFL03320K57W06
Page 11: ...MEMO...
