HF HF-BL200A-0 User Manual Download Page 51

Page: 51 / 51

HF-BL200A Low Energy Bluetooh

（

BLE 4.1

）

Module User Manual

Shanghai High Flying Electronics Technology Co., Ltd www.hi-flying.com

- 51

APPENDIX D: CONTACT INFORMATION

------------------------------------------------------------------------------------------------------------

Address:

Room 1002 ,#1Building,No.3000 Longdong Avenue, Pudong District, Shanghai, China

Post Code

：

201203

Web: www.hi-flying.com
Online consult

：

400-189-3108

Email:

[email protected]

-----------------------------------------------------------------------------------------------------------

For more information ,please visit http://www.hi-flying.com/

The information disclosed herein is proprietary to High-Flying and is not to be used by or disclosed to

unauthorized persons without the written consent of High-Flying. The recipient of this document shall respect the

security status of the information.

The master of this document is stored on an electronic database and is “write-protected” and may be altered only

by authorized persons at High-Flying. Viewing of the master document electronically on electronic database

ensures access to the current issue. Any other copies must be regarded as uncontrolled copies.

Summary of Contents for HF-BL200A-0




















































Search results

Summary of Contents for HF-BL200A-0

Reviews:

Related manuals for HF-BL200A-0

Brands by name

Popular brands

HF HF-BL200A-0, User Manual

Search results

Summary of Contents for HF-BL200A-0

Reviews:

Related manuals for HF-BL200A-0

Brands by name

Popular brands