User Manual
The terminal PE1-/PE1+ are used for active energy pulse output.
The terminal PE2-/PE2+ are used for reactive energy pulse output.
DI (Digital Input)
It is used for measuring real state (connected, disconnected) of external switch, and make a
resolution of the 2ms SOE event record.
Chapter 3 Meter Display and Operation
There are four buttons on the front panel, labeled H, P, E and V/A from left to right. It can be used for
reading real-time metering data, setting parameters though the four buttons.
3.1
Parameters Display
1)
Phase Voltage, Line Voltage and Current
Press button
“
V/A
”
, it will display the values of phase voltage, line voltage and current
circularly.
2)
Press button “E”, it will display the values of energy parameters circularly.
