User Manual
5) Voltage Connection Method Setting
There are 3 kinds of voltage connection methods optional as follows (by pressing button P or E to
choose):
3Ln (Three-phase four-wire 3PT connection)
2Ln (Three-phase four-wire 2PT star
(Y) connection)
2LL (Three-Phase Three-Line open delta
(
Δ
) connection)
After the setting, please press "V/A" to confirm and enter the next setting interface.
6) Current Connection Method Setting
There are 3 kinds of voltage connection methods optional as follows(by pressing button P or E to
choose):
3C (with 3 CTs)
2C (This mode of connection is used for the balanced three-phase circuits, and it
’
s capable to calculate
Ib according to "Kirchhoff's laws". The current input mode of the meter should be set to 2C)
1C (this mode of connection is used for the balanced three-phase circuits, and we only need to measure
Ia, Ia=Ib=Ic )
After the setting, please press "V/A" to confirm and enter the next setting interface.
7)PT & CT Ratio
The setting range is 1~9999.
It should be noted that the product of PT ratio and CT ratio is less than 300 000.
After the setting, please press "V/A" to confirm and enter the next setting interface.
Setting Example:
If the PT ratio is 10kV/100V, the parameter of PT ratio should be set as 100
(the parameter of PT ratio = 10 000 / 100 = 100.
Note: the set of CT ratio is as the same as the PT ratio.
After the setting, please press "V/A" to confirm and enter the next setting interface.
