Fan PV 12000
32 / 36
EN
b)
Install all the safety devices which may have
been dismounted for the purpose of cleaning as
attached at the factory.
The device is cleaned.
Device inspection
a)
Check all visible components and make sure
they are correctly installed.
b)
Check the rubber feet on the framework for
wear and tear and damage.
NOTICE! Motor ball bearing: The ball bearings
are lubricated for life. For this reason, do not
apply grease to the ball bearings.
Inspecting the electrical system
DANGER
Touching electrically live parts can be fatal.
Improper or inadequate inspection and mainte-
nance can lead to device components becoming
live during operation due to a defect.
a)
Inspection of the electrical system should only
be conducted by a qualified electrician.
b)
Once the work has been completed all safety
equipment must be reinstalled as specified and
checked.
a)
Check all the device’s electrical components
visibly for signs of external damage, loose con-
tacts and contamination. Remove the safety
cover in order to inspect the internal wiring.
Remove any external contamination with a lint-
free cloth and replace any defective or dam-
aged components.
b)
If used commercially in Germany: Conduct an
annual DGUV V3 examination in accordance
with German statutory accident insurance
(DGUV) rules and document in a report.
The servicing and inspection of the device is
then complete.
18.2
Wear and spare parts
Spare parts must meet the technical requirements
specified by HEYLO. HEYLO original spare parts
must meet stringent requirements.
HEYLO assumes no warranty for any damage
caused by the use of spare parts from other manu-
facturers.
Enquiries and orders For wear and spare parts,
please contact your dealer or HEYLO directly,
providing the following information:
–
Device type,
–
Serial number,
–
Year of construction,
–
Designation of the component,
–
Quantity,
–
Form of shipping.
See also
19
Repairs
The following section describes who may repair the
device and how it can be repaired.
NOTICE
Repairs may only be carried out by staff authorized
by the manufacturer during the warranty period of
the device.
Repairs perfomed by the company
operating the device
After the statutory warranty has expired, repairs may
be carried out by the company operating the device,
provided appropriate expertise is shown. HEYLO will
not assume any liability for these repairs.
Contact the HEYLO service department or your
dealer if you have any questions about repairs.
