www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
4. How to use your pool vacuum cleaner Quick
V
ac?
A.
Pool exit
Once the pool is clean at your convenience please follow the following steps:
• Bring
the vacuum cleaner
back to you by pulling the telescopic handle
;
• Unplug
the plug
and wait a few
moments
for
the check valve closes and the
collected
dirt
remains trapped.
Or if you have
a power supply box,
press the switch
to the OFF position and unplug the box plug.
•
Grasp the handle and pull it to extract the vacuum from the water, when it comes to
the surface, grasp the side handle to pull the QUICK VAC out of the water.
• Position the Quick Vac on the
trolley
, proceed with cleaning the filter (see next
paragraph),
•
Store the cable by wrapping it on the arms provided for this purpose on the trolley.
It is advisable to wind the cable starting with the part near the vacuum and ending
with the plug, this precaution allows any loops to be discarded by themselves.
In case of electrical box,
please store it away from the weather
CAUTION!
Never pull the Quick Vac out of water by the cable.
9
