Configuration and Operation
LD8 Operations Manual
AB- V-MA-00635_RevA6
22
4.5.3 Setting a Static IP via Terminal
The LD8 is preconfigured with a static IP of 192.168.2.8, however this IP address can be changed to a different
static IP address. The command to change to a static IP follows the structure of:
IPCONFIG [interface_name] [address_mode] [IP_address] [netmask] [gateway]
Example for this:
IPCONFIG ETHA STATIC 192.168.2.8 255.255.255.0 192.168.2.1
4.5.4 Changing IP to DHCP via Terminal
The LD8 can be assigned an IP address via DHCP. If changing to DHCP use the
command to
determine the newly assigned IP address.
CAUTION
Changing the IP address mode to DHCP will require verification of any newly assigned IP
address, which must be performed through connection to one of the three COM ports.
To automatically assign a dynamic IP to the LD8 use the below command:
IPCONFIG ETHA DHCP
To change the unit back to a
static IP, simply follow the instructions in section ‘
Setting a Static IP Via Terminal