Appendix
H000002007-RDS User Manual
│
Version 5.0.0 (2018-09-17)
│204
5. In the Panel tab select NonCZControl as control panel.
6. Define the connection parameters: On the tab Interface you enter the hostname of the computer, on
which the ROMER Interface is installed.
Normally you enter "localhost, NONCZCONTROL" in the address field while Control is selected.
The settings for Panel don’t need to be changed.
M.1.16 RHINOCEROS
Trigger button
3State button - Left
3State button - Right
Short
Hit Pt.
Validate
Long
Burst Pts
Configuration for contact probes
In the menu of Rhino V5 select “Tools > 3D digitizer > Connect”
Then select the type of digitizer: “ROMER digitizer”.