21
M4
0,7
6
ø1,5
12
10
ø8
If the battery level is too low, display shows the
battery symbol oppposite.
If the reference needs to be defined, display
shows
ERR 0
for 2 seconds, and then keeps on
displaying the two arrows opposite.
ERR 0
Error messages
Mounting alternative backs
Fig. 1
Fig. 3
Fig. 4
Undo the 4 tightening screws marked witj
A
before mounting ei-
ther of the optional backs (see below).
Do not remove the screw marked with
B
since this screw serves
to protect the sensor
.
During a data transmission through the RS232 interface,
ERR1
or
ERR2
may appear on display. The first error message means
that a transmitted sign is not allowed, the other that the com-
mand is unknown.
Fig. 2
