18
Request
Meaning
MODx
MOD?
STM
PRE xxx
PRE?
TOLH xxx
TOLL xxx
TOL?
FAC xxx
FAC?
Choosing measuring mode
X=0: ABS, 1: DIFF, 2: MAX, 3: MIN,
4: MAX-MIN, 5: Tolerances
Selected mode requested
Saving PRESET value in the active memory
Entering PRESET value; xxx = true
xxxx.xx or -xxxx.xx mm /
xx.xxxx or -xx.xxxx in
xxx.xxx or -xxx.xxx mm /
x.xxxxx or -x.xxxxx in
PRESET value requested
Enter upper tolerance
Enter lower tolerance
Tolerance values requested
Multiplication factor of displayed value,
xxx = ± 010.000
Multiplication factor requested
Digico 400 - 700 only
All transmitted data as requested are ended with
<CR><LF>.
Any RS command that is not compatible with the indica-
tor’s version are answered with an error message.
Main technical data
– ABS/DIFF measuring modes (models 400-700).
– Metric/Inch unit system.
– Rotating front case housing. Clockwise rotation
through 180° or 90° in the opposite direction
(models 400-700 only).
– Large digital/analogue display with bar graph,
10 mm digit height.
– Measuring force <2 N.
– Displacement speed of the plunger: < 2 m/s.
– Lithium-battery 3V, type CR 2032 (
No.
01961000)
.
– Dimensions according to DIN 878, ISO R463 and
JIS 7503 compliant.
