COPYRIGHT 2009 BY HEXACCTV CO.,Ltd
31
EVENT:
Display channels with event occurred.
Interval (Seconds)
The duration time in seconds for the interval between channels under
SPOT mode.
Skip Video Loss
Channel
Whether to skip channels without video signal.
3-9 UTILITY SETUP
Item Description
HDD Initialization
Select to enter hard disk initialization menu.
Please stop
recording before entering this menu.
Enter the menu,
system will show all the data (model ,volume ) of HDD that
installed in DVR. Check the HDD you’d like to initialize
then press “Start”. HDD initialization is successful when
the status shows “Succeed”
USB Initialization
Clean up all data on USB. Enter USB initialization and
press YES to clean up all data on your USB. The
initialization is done when it’s showed “Succeed”.
System Recovery
Restore system default values
Reset System Events
Reset all the recording events in DVR.
Copy Setup to USB
Copy configuration to a USB device. There will be a file
named “sdvr.config” on your USB.
Download Setup from USB
Download configuration from a USB device into DVR.
Upgrade
Upgrade DVR through USB.
Please stop recording before upgrading.
Notice: PLEASE COPY YOUR DVR SETUP TO USB
BEFORE UPGRADE. DO NOT TURN OFF POWER OR
UNPLUG USB DEVICE DURING THE UPGRADE as it
may cause incomplete firmware upgrade and damage
to the DVR.
System will reboot automatically when the upgrade is
completed.
