HEX H103A, User Manual, Page: 24 / 32

Hex Power System H103A
11. Messages
22
11. Messages
HMI is not displayed if the DC voltage is insufficient.
HMI and messages are displayed if the DC voltage is sufficient.
11.1 Display of Measurements
If the DC voltage is sufficient, the HMI
displays measurements and operation
status.
No HMI LCD Display Content
1
PV 2980W
AC 2880W
PV – Solar cell power(W)
AC – Inverter output power(W)
2
PV 320V, 8A
AC 220V, 9A
PV – Solar cell voltage (V), current (A)
AC – Inverter output voltage (V), current(A).
3
50.0Hz, PF 98.9%
PEAK 2991W
50.0Hz – Output frequency
PF – Inverter output power factor (%).
PEAK – Transient peak generation of inverter (W)
4
TODAY 2.4KWh
TOTAL 152KWh
TODAY – Today’s power generation
TOTAL – Total power generation
The key measurements of the inverter are as shown below.
Initialization
<After activation of inverter>