HEX H103A, User Manual, Page: 22 / 32

Hex Power System H103A
10. AC, DC Disconnection
20
10. AC and DC Disconnection
10.1 AC Disconnection

You can disconnect the AC connector in the
following procedure.
Warning !
This part or task is exposed to fatal danger from the inverter. Ignoring this
warning may result in serious injury or death.
• Before disconnecting the AC and DC connectors, you must shut off the AC and DC lines
to prevent them from being re-inputted.
• There is residual voltage in the inverter even after the AC and DC lines are disconnected.
Therefore, you must wait at least 10 minutes before doing this task.
1. Press the connections at both sides with
a flat-head screwdriver and screw.
2. Pull out the connection to remove it
from the inverter.