UXI Quick Start Guide
May 2019
Settings
After you have gone through the wizard or have a sensor that has already gone
through the wizard, you are able to adjust the settings from the wizard and also
configure additional settings. You can access the settings via the hamburger menu via
the 3 dots on the top right as shown by Figure 2.2 or by pressing
S
.
Figure 2.2
Settings
Figure 2.3
Configurations
Figure 2.3 shows what can be configured, if you have been through the wizard, most
settings are configured for you. If the sensor has not been configured, you will need to
create an SSID for testing, associate the sensor to the SSID and configure testing
which is shown below.
