UXI Quick Start Guide
May 2019
Setting up Ethernet testing
As of the 28
th
of May 2019, wired testing is now enabled once you create a wired
network configuration and associate the network to the sensor. The process is similar
to wireless testing.
1. When in the settings menu, go to Networks and click on the
Wired
tab
2. Click on Add Network
3. Create an alias for the wired network
4.
Advanced
: If you have proxy, this is where you can configure the details (
Figure 3.2
)
5. Click Add to save the network
6. Go to Sensor > Click on the pencil in line with the sensor you want to configure wired
7. Add wired network > Select the network you created in steps 1-5
8.
Configure
: If you would like to give the sensor a static wired IP address
9. Save
Figure 3.2
Create Wired Configurations
