In addition we see a lower power weight ratio with 50% more capacity and
shorter charging cycles compare to Ni-MH batteries.
9.
A Temperature sensor makes the tool stop working automatically
when the temperature over 60°C under long time working, the fault signal
sounds, it means the tool can't continue work until the temperature reduced
to the normal.
Serious
No.
Instruction
What is means
1
★
●
Self-checking
Self-checking to assure
everything is ok
2
★—5sec
Overload
Hydraulic system may
damaged and need
check immediately
3
★ ★ ★
● ● ●
Charging
signal
Lacking power and
need charging
4
★
—5sec
●—5sec
Power lacking
warning
No power and need
charging immediately
5
★★
●●
Temperature
warning
Temperature too high
and need to cool down
6
★★★★
●●●●
No pressure
Motor working but
without pressure
OPERATING INSTRUCTION
Please check carefully before operating. Make sure the tool is complete and has no
damage part.
1. Charging
Push battery into charger and connect the plug, with the plug seat. Make sure
the room temperature is between 10
℃
- 40
℃
. The charging time is around 2
hours. Please see the illustration below.