1. Do not knock any parts of the tool, otherwise it will cause injury.
2. Do not operate without die, otherwise it will damage tool and cause injury.
3. The built-in safety valve goes through strict pressure test before marketing,
please do not adjust the pressure by unprofessional person. If the pressure
is not enough please return the tools back to the service center. The tool
only can be reused after checking and testing trained person.
Standard hexagonal die size:
16.25.35.50.70.95.120.150.185.240.300.400 mm
2
If ask for special size or special shape, please contact the distributor or manufacturer,
they can make die according to detail requirements.
Please select the correct die according to the Al/Cu terminal which to be
crimped, to choose the wrong die may cause loose crimping result or generate
a lot of burs.
UNDERSTAND YOUR TOOL
HL-400B is a tool for crimping Cu/Al lugs with cables from 16-400mm
2
.
It is powered by Li-ion, actuated by motor and controlled by M C U. With a high
pressure hydraulic system, it is a perfect tool to be used in electrical construction
site.
1. Specification
Max. crimping force:
120KN
Crimping range:
16-400 mm
2
Stroke:
42mm
Hydraulic oil:
Shell Tellus T15#
Ambient temperature:
-10 - 40
℃
Battery:
18v 4.0Ah Li-Ion
Crimping cycle:
6s-15s(depending on the connector size
）
Crimp/charger:
Approx. 90 crimps (Cu150 mm
2
)
Charging voltage:
AC 100V
〜
240V; 50
〜
60Hz
Charging time:
Approx. 2 hours
OLED display
：
display voltage, temperature, crimping times,
errors information
Accessories:
Crimping die (mm
2
):
16.25.35.50.70.95.120.150.185.240.300.400
Battery:
2 pcs
Charger:
1 pcs
Sealing ring of cylinder:
1 set
Sealing ring of safety valve:
1 set