13/34
– 8 – Undervoltage
Error
Mains voltage less than 20% as nominal voltage.
Error
consequence
Drive switches off. No brake effective
Error cause
•
Mains voltage too less
•
Power board (A1) defective
Measurement
Check the mains voltage
Measure intermediate voltage, see chapter 9.2.6
Error code reset Perform a MAINS RESET after standstill.
– 9 – Overtemperature
Error
Overtemperature in the motor indicated.
Error
consequence
Drive switches off. No brake effective
Error cause
•
Motor defective
•
Power board (A1) defective
•
Overtemperature switch in motor defective
•
Loosen contact in plug S401 Pin 4 or 5
Measurement
Remove plug S401 and measure between Pin 4 and 5 :
Switch closed:
≈
0
Ω
OK
Switch open:
∞
Ω
defective
See also chapter 9.2.
Error code reset Perform a MAINS RESET after standstill.
