37
7.5.4 Pedestal stop and shelf stop positions
These two features can be used to limit the desk's travelling ran-
ge (e.g. where a pedestal is standing under the desk). A pedestal
stop position can be set in the lower half of the travelling range,
a shelf stop position in the upper half. If a pedestal stop position
is set, this is used as the new end position; a shelf stop position
functions as a new upper end position for the travelling range.
To memorise a pedestal stop / shelf stop position, proceed as
follows:
Fig.52. Container-Stop- / Shelf-Stop-Position
7.5.3 Safety zone
This function produces a safety stop at a defined desk top positi-
on (configured by software). The safety stop works as follows:
7. Operation
No.
Button
Function
1.
Press the
desk top down
button.
Keep the desk top down button pressed
until the desk top stops automatically.
Desk top movement is stopped above the
safety zone.
2.
Press the
desk top down
button again.
Keep this button pressed until the desk
top reaches the height you want.
i
Note
Desk top positions in safety zones cannot be
memorised.
No.
Button
Function
1.
or
Move the desk top to the position you
wish to use as the new pedestal stop /
shelf stop position.
To do this, press the
desk position down
or
desk position up
buttons until the
chosen position is reached.
2.
Simultaneously press the
desk position
up
and
desk position down
buttons and
keep both buttons pressed for approx.
10 seconds. The control unit clicks
twice
once the position has been memorised.
i
Note
These steps must be performed separately for a
pedestal stop position and a shelf stop position.
min.
max.
(max. - min.) /2
(max. - min.) /2
Shelf-
Stop-
Position
Contanier-
Stop-
Position
