Hettich BlueMax Mini Type 3, Operating Manual

Page: 22 / 40

22
en
7. Operation
1. Preparing machine 22
Base frame for BlueMax Mini Type 3 22
Drilling spindles 23
Drill bits 23
Connecting to extractor system 23
Connecting to compressed air supply 23
Connecting to the power supply 23
Add on ”swivel unit with sensor roller“ 24
Connecting BlueMax Mini hose
”without foot pedal“ 24
Connecting BlueMax Mini hose
”with foot pedal“ 24
Add on ”hold-down clamp“ 24
Accessory fence extension 24
2. Preparing for work 25
Setting drilling depth 25
Edge distance 25
Pendulum stops 25
Hold-down clamp 25
Die 26
3. Operating 26
Hold-down clamp 26
4. Fitting Hettich hinges 27
Setting up 27
Drilling 27
Pressing in 28
1. Preparing machine
The BlueMax Mini Type 3 is shipped in cardboard packaging.
A number of parts and components must be installed to
make the machine ready for operation. Once assembled, the
machine must be thoroughly cleaned.
Base frame for BlueMax Mini Type 3
Push work bench with sliding blocks onto the base profile
and fasten the fence runner bracket in place on the base
profile with clamping blocks and cheese head screws.
Fig. 15: Base frame with sliding blocks
Drilling spindles
The machine is delivered with drilling spindles ready moun-
ted. Drilling spindles not needed must be closed off with
the six blanks provided for unused chucks so as to prevent
the threaded pins from working themselves out and provide
effective protection from soiling.
Fig. 16: Drilling spindles
Operation