© 2017 by Hettich AG
page 9
CW II-OM-rev1.0
Hettich AG
Laborapparate
phone:
+41 44 786 80 20
Seestrasse 204a
e-mail:
CH-8806 Baech
internet:
www.hettich.ch
The device is only intended for the designated purpose.
Another use or one which goes beyond this, is considered to be non-intended. The company Hettich AG is not liable
for damage resulting from this.
Observing all information in the operating instructions and complying with the measures described therein is also a part
of the intended use.
2.1
Versions
The device is available in different configurations. If specific equipment features or functions are available only for
certain configurations, this is indicated at the relevant points in this manual.
The functions described in this manual refer to the latest software version.
Due to individual configurations, illustrations in this manual may be slightly different from the actual appearance.
Function and operation are identical. This manual was written in accordance of the software-version 1.00.386
For operation of the device with HETTICH History-software, observe the separate manual
For service and repair (see page
xx
), please refer also to the separate service manual
2.2
Storage and forwarding the operator-manual
This instruction manual belongs with the device and should always be stored where persons working on the device
have access to it. It is the responsibility of the owner to ensure that persons who are working or will work on the
device are informed as to the whereabouts of this operator manual. We recommend that it is always stored in a
protected location close to the device. Make sure that the instruction manual is not damaged by fluid or humidity. If
the device is sold on or transported and then set up again at a different
location, the operator manual must go with it.
2.3
Responsibility of the owner
The owner of the device
- is responsible for the flawless condition of the device and for its proper operation in accordance
to the specifications
- is responsible for ensuring that persons who are to operate or service the device are qualified to do
this, have been instructed accordingly and are familiar with the operating manual at hand
- must know about the applicable guidelines, requirements and operational safety regulations, and
train staff accordingly
- is responsible for ensuring that unauthorized persons have no access to the device
- is responsible for ensuring that the maintenance plan is adhered to and that maintenance work is
carried out properly (see chapter 12)
-
has to ensure that the device and its surroundings are kept clean and tidy, for example through
corresponding instructions and inspections
- is responsible for ensuring that personal protective clothing is worn by operating personnel, e.g.
work-clothes, a.e. protective gloves
- is responsible for ensuring that before starting to work with this device all qualifications are released,
the IQ (Installation-Qualification, the OQ (Operational-Qualification) and PQ (Process-Qualification)
2.4
Requirements of the operating personnel
The device may only be operated and maintained by persons who are of legal age and have been instructed
accordingly. Personnel who are to be trained, instructed or who are undergoing general training may only work with
the appliance under the continuous supervision of an experienced person.
Repairs may only be performed by qualified electricians and are authorised to do so by the manufacturer. The
regulations in the separate service manual must be observed.
2.5
Changes and alternation
No unauthorized changes or alterations may be made to the device. No parts may be added or inserted which have
not been approved by the manufacturer.
Unauthorized modifications or changes result in the CE declaration of conformity losing its validity and the device
should no longer be operated.
The manufacturer is not liable for any damage, danger or injuries that result from unauthorized changes or
alterations, or from non-observance of the regulations in this manual
