V-Switch quad II - Installation and Operation Manual
INTRODUCTION
REAR PANEL (continued)
4 - DVI-I inputs
Connect the analog or digital video signal of your up to four sources to these four DVI-I ports.
5. - RS 232 / RJ45 port
Connect external serial control devices to this RJ-45 port to operate V-Switch quad II remotely, e.g. connect to
this port to access the OSD menu from a computer using the ConfDev device configuration tool (see page 67).
The serial RS 232 port is also used for firmware updates (see page 69).
6 - USB for keyboard, mouse, touch or trackball (console)
Two USB ports allow connecting keyboard, mouse, touch screen or trackball.
Using a USB-Hub, you can connect
multiple
keyboards and mice.
They will work in share mode with an inactivity timeout of 3 seconds.
- USB or PS2 keyboard and mouse (computer)
Each computer source can be connected with PS/2 or USB-B for keyboard and mouse.
8 - Four transparent high-speed USB 2.0 ports
USB devices (printer, memory stick, finger printer, 3D mouse) are connected to the four transparent USB ports.
This transparent USB 2.0 matrix switches USB 2.0 periphals to computer sources connected to V-Switch quad
II.
HARDWARE