G. CARE & MAINTENANCE
Always make sure the pressure cooker is unplugged, depressurized and completely cooled down before dismantling.
Use a non-abrasive sponge or damp wash cloth to clean the exterior of the outer body and the exterior surface
of the pressure cooker. NEVER immerse the pressure cooker in any liquids.
Remove the condensation collector, rinse and let it dry thoroughly. Clean the inner main body with a damp
sponge or wash cloth.
Clean the lid with warm soapy water, including the rubber seal ring, pressure relief valve, filter, vent, pressure
regulating valve and let dry thoroughly.
The pressure relief valve pops off easily by gently reaching underneath it and gently prying upwards. Be careful
not to damage the thin wire spring under it. On the underside of the lid below the pressure relief valve, is a small
metal filter cap which can be easily removed to clean.
1.
2.
3.
4.
Let parts dry completely before reassembling.
Wash the inner pot with a non-abrasive sponge and allow to air dry or use a towel. It is not recommended to use
any type of scouring pad that can scratch the non-stick surface of the inner pot.
Clean the pressure relief valve and the holes with a small brush to ensure smooth flow of steam during the
release cycle.
Store the inner pot inside of the pressure cooker. Store pressure cooker in a cool, dry location.
5.
6.
7.
8.
NOTE:
Any servicing required shall be performed by
an authorized center.
How to clean the filter:
If you wish to clean the filter, you may remove it by
pulling vertically. To re-attach, simply line up the
filter and press down to secure the filter (Figure 9).
9
Page : 20
Summary of Contents for PSC-1603-HC
Page 23: ...Page 23...
Page 24: ...Page 24...
