background image

3

• Wires are coloured as 

follows: 

– Blue = Neutral 

– Brown = Live

•  As the colours of the 

wire may not correspond 

with the coloured 

markings which identify 

the terminals in your 

plug, please refer to the 

following:

 − The Blue wire must 

be  connected to 

the terminal which 

is marked ‘N’

 − The Brown wire 

must be connected 

to the terminal 

which is marked 

with the letter ‘L’.

• Please note that if a 13 

amp plug is used, a 13 

amp fuse should be used.

• Remove any packaging 

material and promotional 

labels or stickers before 

using the Oracle

 Touch 

for the first time.

• To eliminate a choking 

hazard for young children, 

remove and safely discard 

the protective cover fitted 

to the power plug of this 

appliance.

• Do not place the product 

near the edge of a bench 

or table during operation. 

Ensure the surface is level, 

clean and free of water 

and other substances.

• Do not let the cord hang 

over the edge of a bench 

or table, or become 

knotted. Keep away from 

hot gas or electric burner, 

or where it could touch a 

heated oven. 

• This appliance can be  

used by children aged 

from 8 years and above 

if they have been given 

supervision or instruction 

concerning use of the 

appliance in a safe 

way and understand 

the hazards involved. 

Summary of Contents for Sage SES990





























Reviews: