background image

15

HOT WATER

The HOT WATER function can be used to pre-

heat cups or add hot water manually.
To start & stop hot water, touch 'Hot Water' on 

the screen. 
To ensure water is dispensed at the correct 

temperature, hot water will cease to dispense 

after approx. 30 seconds. Depending on the 

size of your cup, you may need to touch the 

'Hot Water' button to stop pouring. 

NOTE

You cannot run hot water and extract espresso 

at the same time.

ADDING NEW DRINK

Touch 'Create New' in the menu screen to 

create a customised drink. You can adjust 

parameters based on a standard style and  

save your own.

Add New

+

Alternatively, after manually adjusting 

parameters touch the small icon 

 to save 

the current setting.

SETTINGS

To enter settings menu, touch the icon 

  

on the upper right on the screen.

Quick Start Guide

Machine will guide you on screen, step by step 

to make an actual coffee.

Auto Start

Auto Start is optional. It allows you to program 

the specific time when the machine will 

automatically turn on.

Time and Date

Time and Date is optional. You can set time  

and date.

Clean Cycle

The Cleaning Cycle cleans the shower screen  

and back-flushes the group head.  

A pop-up message will let you know when it  

is time for cleaning.

Descale Cycle

Descaling prevents excess mineral and scale 

build-up. A pop-up message will let you know 

when it is time for descaling.

Brew Temperature

It allows you to adjust the recommended 

extraction temperature.

Default Milk Temperature

It allows you to adjust default temperature on  

all milk base drinks.

Water Hardness

It is to test water to set how often you need to 

descale the machine.

Screen Brightness

You can adjust brightness of your touch screen.

Work Light Brightness

You can adjust brightness of your work light.

Sound Volume

You can adjust volume for alerts and reminders.

Demo Mode

It is for on-screen Oracle

 demonstration 

sequence.

Factory Reset

Use this function to reset all programmable 

values back to the factory settings and delete all 

custom drinks.

Summary of Contents for Sage SES990





























Reviews: