hestan KVL Series, Installation Use And Care Manual

Page: 11 / 48

CLEANING
Clean the shield(s) and/or blower housing(s) in a sink of warm soapy water (liquid dish detergent)
and let soak for a few minutes. Wash with a sponge or dishcloth, rinse and let drain before
reinstalling. Alternatively, the blower housing(s) and blower shield(s) may be placed into a
dishwasher.
To reduce the risk of personal injury, be sure the power is turned off in
the hood before removing the shield(s) and blower housing(s).
Regular cleaning of the blower housing should prevent grease accumulation on the blower wheel.
If grease build-up should occur, the blower wheel may easily be cleaned in place using a soft bristle
toothbrush and a common degreaser such as Formula 409®.
Take care not to move or lose the metal balancing clips that may be
affixed to the wheel.
Item # Description
1 Balancing clip
2 Blower wheel
2
1
4
3
Item # Description
1
Motor housing
2 Wheel
3 Blower housing with damper(s)
4 Blower shield
1
2
CLEANING AND MAINTENANCE
(CONT.)
©2019 Hestan Commercial Corporation
7
EN